2. Rear Entrance
Figures 2-13, 2-14, and 2-15 show the paper paths for tractor feeding using the rear entrance. You can use the
rear entrance with any of the following paper feed methods: push tractor feed, pull tractor feed, or push-pull
tractor feed.Whe n youuse the rearentrance, the rearPE sensor detects when paper is out.
Figure. 2-13. Push TractorFeeding Using the Rear Entrance
Figure. 2-14. Pull Tractor FeedingUsing the Rear Entrance
As shown above in Figure 2-14, when you use the pull tractor in this printer, you must remove the paper eject
cover, whichincludes the paper tensionroller, from the printer mechanism.
Down
Down
Operating Principles FX-2170 ServiceManual
2-12 Rev.A