Multi Photo and Business Card Feeder

Setup Guide

00-4051186

Set Up Your Scanner

First open the box containing the Epson® Perfection® 2480 Photo scanner and set it up following the instructions on its Start Here sheet. Be sure to install all the software from the scanner CD-ROM as instructed.

XXX

Unpack the Feeder

1 Make sure you have all the parts shown below:

Spare paper path guide (see your scanner Reference Guide for instructions on using this)

Multi Photo and Business Card Feeder

Stand for feeder (when not in use)

2 Remove all the packing tape from the parts.

Install the Feeder

1

2

Turn off your scanner by unplugging it from its power cord.

Note: Make sure you unlocked the transportation lock on your scanner. See the Start Here sheet that came with your scanner for instructions.

Disconnect the cover cable from the scanner.

3 Open the scanner cover.

4 Pull the scanner cover straight up to remove it.