4. Grasp the battery removal ribbon, which is attached to the
inside of the battery compartment. See Figure 12.
CAUTION: If you forget to hold on to the ribbon, you may
accidentally insert the battery on top of it. Then you
won’t be able to remove the battery by pulling the
ribbon.
Removal Ribbon
CHARGE
REFRESH
ON
OFF
POWER DATA ERROR
AC ADAPT.
!
INTERFACE
FIGURE 12. Placing the battery inside the
battery compartment
5. While holding onto the ribbon, tilt the battery and place it inside the
battery compartment. Once the battery clears the outer edges of the
compartment, press it securely into position.
Make sure the side of the battery with the warning label faces the
outside of the battery compartment. Otherwise, the battery cover
will not close properly.
NOTE: The side of the battery opposite the warning label contains
a heat sensor that stops the flow of electricity if the battery
overheats.
6. Attach the battery cover to the end of the battery compartment
opposite the AC adapter receptacle. Close and latch the cover. If
necessary, gently push the cover latch towards the AC adapter
receptacle until it latches.