Switching From Fanfold Paper to ASF

If you have been using fanfold paper and the printer receives a command to load a cut sheet through the Automatic Sheet Feeder:

1.Park the fanfold paper: press the SHIFT key and then the PARK key to enable the PARK function, the message Parking paper will be displayed.

2.Place the drive selection lever in the cut sheet position. Press the ON LINE key.

Inserting Manual Cut Sheets Without Removing the ASF

Follow the sequence:

• Open the paper bins.

• Make sure that the printer is disabled to print.

• Insert the cut sheet in the entry slot in front of the first bin until it stops against the platen. Perform the paper loading procedure as explained before in “Loading Cut Sheets ” section.

• Whenever you wish to enable again the ASF loading, stack the paper in the bins and close them.

107