8.Replace the printer cover by first inserting the hooks (1) into the appropriate grooves

(2) and then lower the cover ensuring that clicks in place.

•If your printer is the 4051N plus or the 4056N plus model, simply lower the printer cover to close it.

9. Move the paper thickness lever according to the paper type:

• If a cut sheet is loaded move the lever towards the back of the printer.

• If a multicopy-chemical paper is loaded, first move the lever completely towards the back of the printer, then 1 notch towards the front of the printer

for each copy.

• If a carbon multicopy-paper is loaded, first move the lever completely towards the back of the printer, then 2

notches towards the front of the printer for each copy.

Now, you can load the paper and print your first test document, see “Printing the Self Test”. If the pattern does not satisfy your expectation, adjust the paper thickness lever again.

When printing on multicopy-paper follow the above instructions to avoid damaging the print head.

12