Buffer cleared | Displayed after input buffer clearing (all the stored data are erased). |
|
|
Call Service | Displayed in rolling mode together with the failure message to |
| indicate a call to Service. |
|
|
Carriage error | Displayed when there is an unrecoverable carriage error. This means |
| that the printer carriage does not move correctly. When the |
| Carriage error message is displayed, the indicator READY blinks. |
| Check that the ribbon cartridge is not used up neither damaged. |
|
|
Check connection | Displayed when a DSR, DCD, or CTS signal fault occurs. |
|
|
Check interface | Displayed when an Input buffer overflow occurs |
|
|
Check its moving | Displayed when a carriage fault occurs. |
|
|
Check line | Displayed when a communication error occurs. |
|
|
Comm. failure | Displayed when a communication error occurs |
|
|
Data lost | Displayed when an input buffer overflow occurs. |
|
|
Enable path FF | This message appears on the display immediately after switching |
| Manual path to Fanfold path. Place the drive selection lever in the |
| fanfold position. |
|
|
Enable path SS | This message appears on the display immediately after switching |
| Fanfold path to Manual path. Place the drive selection lever in the |
| single sheet position. |
|
|
Fanfold | This is one of the messages that will be displayed when you press |
| PATH (Shift function). Press the SHIFT key to select the fanfold paper |
| path. |
|
|
23