•If your printer is the 4051plus or the 4056 plus model and you wish to position the first printing column at 25 mm from the edge of the paper, slide the left paper guide to the left as far as it will go, then adjust the right paper guide according to the paper width.

2.Move the paper thickness lever according to the type of paper:

• If a cut sheet is loaded move the lever towards the back of the printer.

• If multicopy-chemical paper is loaded, first move the lever completely towards the back of the printer, then 1 notch towards the front of the printer for each copy.

• If carbon multicopy-paper is loaded, first move the lever completely towards the back of the printer, then 2 notches towards the front of the printer for each copy.

Now, you can load the paper and print your first test document, see “Printing the Self Test”. If the pattern does not satisfy your expectation, adjust the paper thickness lever again.

When printing on multicopy paper, follow the above procedure to avoid damaging the print head

71