Top of Form Adjustment
The Top of Form Adjustment procedure allows you to adjust the position of the first printable line and therefore it is advisable to perform it immediately after a paper loading. Turn the printer on, if it is not, and proceed as follows:
Make sure that the printer is not printing. (READY indicator unlit). If the fanfold paper has been loaded, park it by pressing the PARK key. If the cut sheet has been inserted, eject it by pressing the FF key.
1.Press the PROGRAM key. The following message will be displayed:
SELECT MACRO
2.Press the ↓ key until the following message is displayed:
PRINT ADJUSTMENT
3.Press the → to select the function. The following message will be displayed:
BID. ALIGNMENT
4.Now go on pressing the ↓ key until the following message will be displayed
TOP OF FORM
5.Press the → key to select the function. The paper is unloaded and reloaded at the TOF quote. The current value will be printed and the display will show the following message:
0/72 inches | (4051/4051N plus models) |
|
|
or |
|
0/90 inches | (4056/4056N plus models) |
|
|
The paper is moved to the view position. While scrolling all the possible values by pressing the ↑ and ↓ keys the paper will be moved.
Pressing again the → key the displayed value is selected and printed, after the paper has been taken to the correct position. Then the paper will be taken to the view position.
81