Assembling the Printer

6.Replace the paper-tension unit by placing it on the printer’s mounting pegs; then lower the front of the unit into place. Press on the front of both sides of the paper-tension unit until you feel it click into place.

7.Replace the printer cover by first inserting the front tabs into the slots on the printer; then lower it into place.

Note: You install the optional #7768 or #7770 film ribbons in the same way as you install the ribbon cartridge. However, you should follow the guidelines below when using a film ribbon:

•

•

Print on ordinary paper only.

Move the paper-thickness lever to the next lowest position.

1-8 Setting Up the Printer