Micro Feed

The micro-feed feature allows you to move the paper forward or backward in l/180-inch increments. You can use this feature to adjust the loading and tear-off positions.

When you make adjustments to the loading or tear-off positions with continuous paper, the printer remembers the new position, even if you turn off the printer.

When you adjust the loading position of single-sheet paper, the printer remembers the new position until you turn off the power. The loading position returns to the factory setting when the power is turned on again.

Using micro feed

To use the micro-feed feature, you press the ALT button at the same time as you press the LOAD/EJECT or LF/FF button, as indicated on

the printer’s control panel. To use the micro-feed feature, follow the steps below:

1.Make sure printing has stopped.

2.While holding down the ALT button, press the LOAD/EJECT button to feed the paper forward or the LF/FF button to feed the

paper backward, as indicated by the arrows above the bottons.

Using the Printer

3-13