Pull Tractor
6.Move the
7.Attach the continuous paper to the pull tractor as described in Chapter 2.
8.Pull out on the gear at the right side of the pull tractor and turn it to remove any slack in the paper between the push and pull tractors.
9.Place the notches on the paper guide straight down over the mounting posts on the printer.
10.Slide both edge guides to the middle of the paper guide. Slightly lift the paper guide and then lower it until it rests on the printer.
11.Replace the printer cover by inserting the front tabs into the slots on the printer and then lowering the cover into place.
Note: When you want to print several pages of continuous paper, fold the first page forward at the perforation after the perforation emerges from below the printer cover. This helps the printer feed the printed pages properly and prevents paper jams.
Using Printer Options |