Using the Remote Control

pointer button

 

bottom

top

multi-purpose button

 

multi-purpose

 

button

 

The remote control uses a line-of-sight infrared signal. To use the remote control, point it towards one of the remote control receivers located at the front and back of the projector.

You can use the remote control up to about 32.8 feet (10 meters) from the projector. (This distance may be shorter if the remote control batteries are low.) You must also be within a ± 30° angle from the front or rear sensor.

Note: The projector may not respond to remote control commands in these

conditions: ambient light is too bright; a certain type of fluorescent light is present; a strong light source (such as direct sunlight) shines into the

Using the Remote Control

37