Epson 500 Series Note, Typing the Password, 2-4Using Your Computer, Enter CURRENT Passsword:, If you want to change your current password or disable the

IfyouenaMethesehrppassword,youmustenter it before you can use the Setup program. The computer prompts you for the password after you press Delete to start Setup.

Typing the PasswordYou see this prompt when the password feature is activated:Enter CURRENT Passsword:

Type the correct password and press Enter. To protect your password, the screen does not display the characters you type.

If you do not type the correct password, the screen displays an X and repeats the passord prompt. Try typing the password again.

The computer allows you three tries to enter it correcly. After the third incorrect attempt, the system displays a blinking face icon and locks up. You must reset the system to try again.

Note

If you want to change your current password or disable the

password function, you need to use the Setup program. See

Chapter 5 for instructions. If you forget your password, call the

EPSON Connection for assistance at 1-800-922-8911 in the United States or 1-800-GO-EPSON in Canada.

2-4 Using Your Computer