Epson 500 Series Adding Memory Modules or a Numeric coprocessor, 4-10 Connection Optional Devices, Appendix B provides a summary of the modem's features and

If you have a fax/modem, your package also includes BitCom data communications software and WinFax LITE fax transmission software already loaded on your hard disk drive. See the documentation that came with these applications for details on how to use them.

Appendix B provides a summary of the modem's features and

internal command set. You need to use the fax/modem's built-in set of commands only if you are not using the telecommunications software package. Each communications programs provides its own set of commands that you will use to control the modem instead of the built-in set.

Note

Be sure to read the modem FCC information at the back of this manual to avoid electrial interference problems.

Adding Memory Modules or a Numeric coprocessor

The sections below describe how to add memory to your computer and install a numeric coprocessor. To access the sockets for these options, you need to remove the keyboard.

Caution

It is best to have your Authorized EPSON Servicer install the memory module or a numeric coprocessor for you because they can be damaged easily if installed incorrectly. If you prefer to install them yourself, carefully follow the instructions in this section. If you have any question at all, please contact your Authorized EPSON Servicer or call the EPSON Connection.

4-10Connection Optional Devices