66 Using HDMI Link
Using HDMI Link
When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you
can control them using the HDMI Link control buttons on the projector’s remote control.
This lets you use just one remote control to operate many commonly used features on all your
devices.
In a typical configuration, your DVD, Blu-Ray or other media player may be connected to
the projector through an amplifier or home theater system. You can connect up to three
media players that conform to the HDMI CEC standard. Even if the amplifier does not
conform to the HDMI CEC standard, you can still use the projector’s HDMI Link control
buttons to operate the media player as long as the media player conforms to the HDMI CEC
standard.
Note: Some HDMI CEC functions may not operate, depending on the connected product’s design
and compliance with the HDMI CEC standard.

Setting Up HDMI Link

To prepare your devices to work with the HDMI Link control buttons, follow these steps:
1. Press the HDMI Link button on the projector’s remote control.
2. Select HDMI Link and set it to On.
Amplifier Media player
HDMI
HDMI