Advanced Scanning

Note:

This procedure does not save custom tone curve settings. Refer to Re-use Tone Curve Settings for the procedures on saving tone curve settings.

Saving and Re-using Scanning Settings

You can save your scan settings in a special settings file with a .TWN extension. You can either overwrite the existing settings file, or you can save your settings as a new file and keep the existing settings file. When you want to use a particular group of settings again, you can load the appropriate file.

To save a new settings file that overwrites the old settings file, do the following: From the Settings menu, click Save Settings. The new file overwrites the old settings file.

To save a settings file under a new name and keep the old settings file, do the following:

1.From the Settings menu, click Save Settings As. The Save As dialog box appears.

2.Enter a new file name and path.

Page 49