EPSON® PowerLite® 600p/811p/820p
Quick Setup
|
|
| R | |
|
| E |
| |
T | H |
| E | |
|
|
| ||
|
|
|
| |
R |
|
|
|
|
T Connect the projector | ||||
A |
| to your laptop | ||
| S |
| ||
|
|
|
| |
For most setups, you’ll need just these two cables:
power cord | computer cable |
1 Make sure your projector and laptop are turned off.
2 Connect one end of the computer cable to the Computer/Component Video port on the projector.
Follow these instructions to connect the projector to your laptop. To connect other devices, such as a VCR or desktop PC, see your User’s Guide.
3 Connect the other end to your laptop’s video or 
monitor port.
Plug in your projector
Connect the power cord to your projector and plug the other end into a grounded outlet. 
Turn on your equipment
1 Remove the lens cover.
2 Turn on the projector first. To do so, press the red Power button. | |
The | power light flashes green as the projector warms up, |
and the projection lamp comes on in about 30 seconds.
3 Turn on or restart your laptop. (Windows® only: If you see a
New Hardware Wizard screen for a Plug and Play monitor, click Cancel.)
power light
power button
Caution: Before unplugging the projector...
Press the red Power button twice, then let the projector cool while the 
power light flashes orange (about a minute and a half). Once the light stops flashing and stays on, it’s safe to unplug the projector.
Never unplug the projector when the
power light is green or flashing orange.
