Follow these steps to replace the lamp:

1.Turn off the projector and unplug the power cable.

2.Allow the projector to cool down for at least an hour (if it has been on).

3.Use a screwdriver to loosen the two retaining screws on the lamp cover. (You cannot remove these screws from the cover.) After loosening the screws, lift off the lamp cover.

4.Use a screwdriver to loosen the three screws holding the lamp in place. (You cannot remove these screws.)

warning

Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to avoid injury.

handle

5. Lift up the handle and pull out the lamp.

Maintaining and Transporting the Projector 87