Installing Batteries in the Remote Control

Follow these steps to install or replace the remote control’s batteries:1.Press the tab to release the battery compartment cover.
2. Remove any old batteries.

tab

3. Insert two AA batteries as shown.4. Replace the battery compartment cover.

Before using the remote control, make sure the switch on its side is in the ON position (see below).

With fresh batteries installed, the remote control should work at a distance of about 30 feet from the projector; as the batteries get old, the remote control’s range decreases

and you may need to replace the batteries.

caution

When replacing batteries, take the following precautions:

■Don’t mix old and new batteries.

■Replace batteries as soon as they run out. If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash them immediately.

■Remove batteries if you won’t be using the remote control for a long time.

Maintaining and Transporting the Projector 89