ENGLISH
Basic Operation
F G, ENTER
SURROUND PARAMETER D H
ENTER
D H F G
[STANDARD]
SURROUND
PARAMETER
ENTER
D H F G
Selecting the Dolby Pro Logic IIx (Pro Logic II) mode
It is possible to play analog input signals and digital input signals (2- channels) in the surround mode.
This mode is optimal for playing program sources recorded in Dolby Surround.
1 Press [STANDARD] to select “DOLBY PLIIx”.
DOLBY PLIIx 
DTS NEO:6
NEURAL SURROUND 
2 Play a program source.
3 Press SURROUND PARAMETER.
4 Press F G to select the play mode.
CINEMA:
This mode is suited for playing movie sources recorded in Dolby Surround and general sources recorded in stereo.
MUSIC:
This mode is suited for playing stereo music signals in the surround mode. With music signals, the sound field expansion differs according to the type of music, the recording conditions (live/studio), etc.. Because of this, the MUSIC mode offers a number of optional parameters for further adjusting the sound field.
GAME:
This mode is optimum for games. The GAME mode can only be used for
PL:
This mode is compatible with conventional Dolby Pro Logic sources.
Basic Operation
5 Press D H to select the item, then press F G to set.
The mode switches as shown below each time the button is pressed.
• When the CINEMA mode:
MODE CINEMA
CINEMA EQ 
TONE DEFEAT
DEFAULT
SURROUND BACK
• When the MUSIC mode:
MODE MUSIC
TONE DEFEAT
SURROUND BACK 
DEFAULT
CENTER WIDTH 
DIMENSION 
PANORAMA
• When the GAME mode:
MODE GAME
TONE DEFEAT 
DEFAULT
SURROUND BACK 
• When the DOLBY PRO LOGIC mode:
MODE DOLBY PL 
CINEMA EQ 
TONE DEFEAT
DEFAULT
SURROUND BACK 
If you do want the bass and treble to be adjusted, turn off the tone defeat mode.
When “MUSIC” mode is selected:
PANORAMA:
This is effective when the surround effect seems weak.
DIMENSION:
This shifts the center of the sound field image to the front or surround side. This compensates for when the sound field image seems unbalanced. (0 to 6, default : 3)
CENTER WIDTH:
A natural expansion to the front can be achieved by adjusting the center signal’s output balance between the center and front channels. (0 to 7, default : 3)
About the button names in this explanation
<> : Buttons on the main unit
[ | ] : Buttons on the remote control unit |
Button name only :
Buttons on the main unit and remote control unit
6 Press ENTER or SURROUND PARAMETER.
23
ENGLISH