Many of the commands available on the Status Monitor menus can be accessed directly by clicking the buttons on this toolbar. If you point to a toolbar button, the corresponding menu command appears briefly on your screen, and an explanation of the button’s function appears in the Status Bar at the bottom of the Status Monitor window.

NT 3.51 & 4.0:

Job Status is not available.

Note:

0Close the Printer list window when you do not need it: this window uses computer resources if left open.

UIf you change the printer port setting (Print to the following port or Print to) in the printer driver, quit EPSON Status Monitor 2 as described in “Stopping Monitoring” on page 2-19, and then restart it.

Installed Printers list

This list displays information about the EPSON printers that are connected to your computer through the network and have printer drivers installed in your system. To change the printer information that is displayed in this list, see “View menu” on page 2-8.

Printer Name

Provides the names of the installed printers. You can add or delete printers to be monitored by choosing Add Printer or Delete Printer from the Settings menu. To save computer resources and reduce network traffic, delete printers you do not need to monitor. (Doing so does not remove the printer driver from your computer.)

Using EPSON Status Monitor 2 2-9