Epson CPD 9387 Configuring for a Network, Macintosh Users

Configuring for a Network

This section contains information not provided in your Setup Guide or Reference Guide. Before you can use your printer on a network, you must configure your computer as described in this section.

Macintosh Users

To set up the printer so that you can use it on an AppleTalk network, you need an optional EPSON Ethernet interface card for your printer.

You’ll first need to install the printer software on all the computers (see page 9). Then follow these steps:

1.Turn on your printer.

2.Open the AppleTalk Control Panel and choose Ethernet or a specific Ethernet slot.

3.If prompted, click Save.

4.Open the Chooser from the Apple menu and click

the icon.

12