USB Menu
These settings control communication between the CX11N and the computer when they are connected using a USB interface. Some items may not appear unless corresponding devices are installed.
Item | Settings |
USB I/F | On, Off |
|
|
USB Speed | HS, FS |
|
|
After these settings are changed, the new settings don’t take effect until after a reset or after the power is turned off and on again, even though it is shown on the Status Sheet.
Network Menu
These settings control communication with the CX11N when it is connected to a computer network.
Item | Settings |
Network I/F | On, Off |
|
|
Network Config | No, Yes |
| If Yes is selected then Get IPAddress, IP, SM GW, |
| Appletalk, MS Network, Rendezvous, and Link Speed appear |
| as available settings in the Network menu. |
|
|
Get IPAddress | Panel, Auto, PING |
|
|
IP (IP address)* | 0.0.0.0 to 255.255.255.255 |
|
|
SM (Subnet mask) | 0.0.0.0 to 255.255.255.255 |
|
|
GW (Gateway address) | 0.0.0.0 to 255.255.255.255 |
|
|
AppleTalk | On, Off |
|
|
MS Network | On, Off |
|
|
Rendezvous | On, Off |
|
|
Link Speed | Auto, 100 Full, 100 Half, 10 Full, 10 Half |
|
|
Accessing the Setup Menu 75