Epson CX3200 manual

Unpacking

Unpacking Unpacking

Unpacking

Setting Up the Stylus CX

Setting Up the Stylus CX Setting Up the Stylus CX

Setting Up the Stylus CX

1. Unlocking2. Attaching the Parts

Attach the panel in order to view the supported language.

3. Plugging in the Power Cord4. Installing the Ink Cartridges

1. Press the P On button to turn on this product.

2. Open the ink cartridge packages.

3. Insert the ink cartridges as illustrated below.

Note:

Install both ink cartridges. This product does not work unless both cartridges are

installed properly.

4. Close the scanner unit.

Ink charging starts. It takes about one and a half minutes. While charging, this

product produces a variety of mechanical sounds. This is normal. When the P

On light stops flashing, ink charging is complete.

cCaution:

❏Do not turn the power off during the ink charging process.

❏Do not load paper until ink charging is complete.

Note:

The ink cartridges packaged with this product are partly used during the initial

setup to fully charge the print head. This one-time process consumes a

considerable amount of ink but subsequent cartridge sets will last for their full

rated life.

5. Selecting Language

You can select your preferred language for use on the LCD panel. For details, see

Chapter 1 in the Copy Guide.

This product is now ready to make copies. See “Using the Copy Feature”. If you want to

print data or scan images, set up your computer as described below.

Setting Up the Computer

Setting Up the Computer Setting Up the Computer

Setting Up the Computer

1. Connecting

1. Turn off your Stylus CX.

Note:

Do not turn on this product until a

message prompts you to do so.

2. Connect the USB cable.

Note:

If the “Add New Hardware Wizard” dialog box appears, click Cancel and

disconnect the USB cable from this product.Then return to step 1. Connecting.

2. Installing the Software

cCaution for Macintosh users:

Turn off all virus protection programs before you install the software.

For Mac OS X users, see "Installing the Software for Mac OS X".

1. Make sure that this product is off.

2. Insert the software CD into the CD-ROM drive.

For users of Mac OS 8.6 to 9.x:

Double-click the EPSON icon in the EPSON folder.

3. The EPSON Installation Program dialog box appears.

Select Install Software, and then click .

4. Follow the on-screen instructions.

5. For users of Mac OS 8.6 to 9.x

After installing the software, choose Chooser from the

Apple menu, and then select the icon for this product

and the port that this product is connected to.

Note for Windows users:

You may need to restart your computer while installing the software. If a message

instructing you to restart appears, remove the software CD, then click Restart. After

restarting make sure this product is off, then reinstall the software.

This product is now ready to print and scan. The Reference Guide includes detailed

information about printing and scanning. To view the Reference Guide, see "Viewing the

Reference Guide".

power cord

USB cable

paper support

ink cartridges Power cord may come

attached in some countries.

feeder guard

The contents may vary in certain locations. Remove all tapes and protective materi als following the Notice Sheet.Be sure to use the USB cable

that comes with this product.

CD-ROM

Set the paper support to

align with the arrows on

this product.

Copy

Error

Scan

Recall Reset Copies

Value

B&W

Stop

Return to Top

Color

Enter

Reset all(3sec)

Save(3sec)

Press the P On button.

Do not touch this part.

Do not remove the blue portion of the tape seal

from the top of the cartridges.

①②③④⑤

Scan

Recall

Save(3sec)

Error

Scan

Recall Reset

Reset all(3sec)

Save(3sec)

Flashing On

Error

Scan

Recall Reset C

Reset all(3sec)

Save(3sec)

Press to turn off. For users of Mac OS 8.6 to 9.x

EPSON Installation Program

dialog box

Using the Copy Feature

Using the Copy FeatureUsing the Copy Feature

Using the Copy Feature

1. Preparation2. Making a CopySelect Various Copy Modes and Other Options

Standard Copy

Standard CopyStandard Copy

Standard Copy

You can copy the original image to various

sizes or types of single sheet paper.

Use the Copies/Value buttons to select

Standard from the Copy Mode menu.

Note:

In the Reduced Margin Copy mode, you can

make a copy with a 3-mm bottom margin on

paper.

BorderFree Copy

BorderFree CopyBorderFree Copy

BorderFree Copy

You can copy to the full page (including the

margin area) of paper.

Use the Copies/Value buttons to select

Borderfree from the Copy Mode menu.

Note:

Because this feature enlarges the image to a

size slightly larger than the paper size, the

portion of the image that extends beyond the

edges of the paper will not be printed.

Small Margin Copy

Small Margin CopySmall Margin Copy

Small Margin Copy

You can make copies with a 1.5-mm margin

around all edges of paper.

Use the Copies/Value buttons to select Small

Margin from the Copy Mode menu.

Mirror Copy

Mirror CopyMirror Copy

Mirror Copy

You can create the mirror image of an original

image on Iron-On Cool Peel Transfer Paper

(image flipped from right to left).

Use the Copies/Value buttons to select Mirror

from the Copy Mode menu.

Repeat Copy

Repeat CopyRepeat Copy

Repeat Copy

You can create multiple copies of an image on

a sheet of paper.

Use the Copies/Value buttons to select Repeat

from the Copy Mode menu.

2-up Copy

2-up Copy2-up Copy

2-up Copy

You can put two pages of the original images

on a sheet of paper.

Use the Copies/Value buttons to select 2-up from

the Copy Mode menu.

Auto Fit Page

Auto Fit PageAuto Fit Page

Auto Fit Page

You can make a copy with enlarging or reducing each page of your document

automaticaly to fit the size of paper set in the sheet feeder.

Use the Copies/Value buttons to select Auto Fit Page from the Reduce/Enlarge

menu.

Installing the Software for Mac OS XInstalling the Software for Mac OS XInstalling the Software for Mac OS XInstalling the Software for Mac OS X

1. Make sure that this product is off and insert the software CD into the CD-ROM drive.

2. Double-click the Mac OS X Driver folder. → Double-click the EPSON TWAIN folder. →

Double-click your preferred language folder. → Double-click the EPSON TWAIN folder.

→ Double-click the EPSON TWAIN 5 Installer icon. Follow the on-screen instructions to

install EPSON TWAIN.

If the Authorization window opens, click the key icon, enter the administrator's name

and password, click OK, and then click Continue.

3. After installing EPSON TWAIN, double-click the EPSON Scan to File folder in your

preferred language folder, and then double-click the EPSON Scan to File Installer icon

to install EPSON Scan to File.

4. After installing EPSON Scan to File, double-click the Printer Driver folder in the Mac OS

X Driver folder, and then double-click CX3200.pkg in your preferred language folder to

install the printer software.

5. After installing the software, follow the instruction below to select this product:

Double-click Macintosh HD. → Double-click the Applications folder. → Double-click the

Utilities folder. → Double-click the Print Center icon. → Click Add Printer. → Select EPSON

USB. → Select this product. → Click Add.

Viewing the Reference GuideViewing the Reference GuideViewing the Reference GuideViewing the Reference Guide

To learn more about this product, see the Online Reference Guide.

For Windows users

1. Insert the software CD into the CD-ROM drive. The Installer dialog box appears.

If the dialog box does not appear, double-click SETUP.EXE in the CD-ROM.

2. Select User Guides and click .

For users of Mac OS 8.6 to 9.x

1. Insert the software CD into the CD-ROM drive.

2. Double-click the EPSON icon inside the EPSON folder, then select User Guides and click

For Mac OS X users

1. Insert the software CD into the CD-ROM drive.

2. Double-click the Manual folder inside the EPSON folder, then double-click the REF_G

folder in your preferred language folder. Then double-click the INDEX.HTM.

①② ③ ④

Copy

Error

Scan

Recall Reset Copies

Value

B&W

Stop

Return to Top

Color

Enter

Reset all(3sec)

Save(3sec)

Copy

Error

Scan

Recall Reset Copies

Value

B&W

Stop

Return to Top

Color

Enter

Reset all(3sec)

Save(3sec)

Copy

Error

Scan

Recall Reset Copies

Value

B&W

Stop

Return to Top

Color

Enter

Reset all(3sec)

Save(3sec)

Press the P On button. Press the Copies/Value buttons

to set the number of copies. Press the B&W Copy button (to copy in

grayscale), or the Color Copy button

(to copy in color).

①②③④⑤

Copy

Error

Scan

Recall Reset Copies

Value

B&W

Stop

Return to Top

Color

Enter

Reset all(3sec)

Save(3sec)

Copies/Value buttons

Menu buttons

Stop button

This product provides you with a variety of copying options. You can choose from various

formats and use many different types of paper.

1. Press one of the Menu buttons until Copy Mode appears on the LCD panel

2. Press one of the Copies/Value buttons until the desired copy mode appears.

3. Use the Menu and Copies/Value buttons to make other copy settings.

4. Press the Stop button. The settings you made appear on the LCD panel.

See the Copy Guide for the available menu items in each copy mode.

123

45678910

1112 13 14 15 16 17

1819 20 21 22 23 24

2526 27 28 29 30 31

123

45678910

1112 13 14 15 16 17

1819 20 21 22 23 24

2526 27 28 29 30 31

Setup English

cCautions must be observed

to avoid damage to your

equipment.

Notes contain important

information and useful tips on the

operation of this product.

Cautions and Notes

4033391-00

xxx