ESC T |
| Cancel Superscript/Subscript |
Format: |
|
|
ASCII code: | ESC | T |
Decimal: | 27 | 84 |
H e x a d e c i m a l : 1 B 5 4
Comments:
Cancels either superscript or subscript.
ESC - |
|
| Turn Underlining Mode On/Off |
Format: |
|
|
|
ASCII code: | ESC | - | n |
Decimal: | 27 | 45 | n |
Hexadecimal: | 1B | 2D | n |
Comments:
The following values can be used for n:
1:Mode is turned ON. (The decimal or hexadecimal values 0
0:Mode is turned OFF. and 1 or the ASCII characters “0” or “1” can be used.)
This mode provides continuous underlining, including spaces. This command is available in both draft and NLQ.
ESC 4 |
| Select Italic Mode |
Format: |
|
|
ASCII code: | ESC | 4 |
Decimal: | 27 | 52 |
H e x a d e c i m a l : 1 B 3 4
Comments:
Causes italic characters to be printed. This command is valid even if the Epson Extended Graphics character set has been selected by ESC t or the DIP switch
Command Summary