Name Function
Y[User] button Press to assign a frequently used item from the six
available configuration menu items. By pressing the
button the assigned menu item selection/adjustment
screen is displayed, allowing you to make one-touch
settings/adjustments. s p.59
Test Pattern is assigned as the default setting.
Z[LAN/USB] button Each time you press this button, the image is switched
between the image from a computer that is connected to
the projector through the network and the image from the
USB device that is connected to the USB(TypeA) port.
(EB-G5950/G5650W only)
This button does not function when using EB-G5900/
G5800/G5600/G5500.
aID switch Use this switch to enable (On)/disable (Off) ID settings for
the remote control. s p.42
b[DVI-D/HDMI] button Changes to images from the HDMI input port. (EB-
G5950/G5900/G5650W/G5600 only)
This button does not function when using EB-G5800/
G5500.
c[Source Search]
button
Changes to the next input source that is connected to the
projector and is sending an image. s p.27
dIndicators A light is emitted when outputting remote control signals.
eRemote control light-
emitting area
Outputs remote control signals.
Installing the batteries

The batteries are not set in the remote control when it is sold. Set the

supplied batteries (two, AA alkaline batteries) to use the remote control.

Attention
Make sure you read the Safety Instructions before handling the batteries.

s

Safety Instructions
Procedure
A

Remove the battery cover.

While pushing the battery compartment cover catch, lift the cover

up.

B

Insert the batteries in the correct direction.

Part Names and Functions
18