Sub Menu Function
Remote Receiver You can limit the reception of the operation signal from the remote control.
When you want to prohibit operation by remote control, or if the remote receiver has a fluorescent light too close to it, you can make settings to
deactivate the remote receiver you do not want to use or that is experiencing interference.
If the [Menu] button on the remote control or control panel is pressed for 15 seconds, this parameter will return to the default setting.
User Button You can select the item assigned from the configuration menu with the remote control's [User] button. By pressing the [User] button the assigned menu
item selection/adjustment screen is displayed, allowing you to make one-touch settings/adjustments. You can assign one of the following six items to the
[User] button.
Power Consumption, Info, Progressive, Test Pattern, Multi-screen, and Resolution
Test Pattern When the projector is setup, a Test Pattern is displayed so that you can adjust the projection without connecting other equipment. s p.21
Reset You can reset all adjustment values on the Settings menu to their default settings, except for User Button.
To return all menu items to their default settings, see s p.83
Settings Menu60