44 - Ending
3
Check to confirm that the Operation Indicator is illuminated in orange, and then
unplug the Power Plug from the socket.
4
Set the R/C ON OFF switch to [OFF] when using the remote control.
Point
The batteries are being consumed when the [R/C ON OFF] switch on the remote control
unit is set at [ON]. Ensure that the [R/C ON OFF] switch on the remote control unit is set to
[OFF] when not in use.
5
Restore the Front Foot if it has been extended.
Steady the projector by hand, and then lift the Foot Adjust Lever with a finger and gently
lower it into the main Unit.
6
Attach the lens cover.
Caution
Do not remove the Power Plug from the socket when the Operation Indicator is blinking in
orange. Failure to observe this may result in damage to the equipment and will speed up the
period for replacing the lamp.
Socket
Power Cable
Power Plug
Illuminated in orange
Operation Indicator
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2
4
Enter
Foot Adgust Lever