Problem Solving 76
fImage colors are not right
fImages appear dark
fNothing appears on the external monitor
Check Remedy
Do the input signal settings match the signals from the
connected device?
Change the following settings according to the signal for the connected equipment.
In case of an image from a computer connected to the Computer1, Computer2 input terminal s"Signal"-
"Computer1/2 Input" p.44
When projecting images from equipment connected to Video or S-Video s"Signal"-"Video Signal" p.44
Is the image brightness adjusted correctly? Adjust the "Brightness" setting from the configuration menu. s"Image"-"Brightness" p.43
Are the cables connected correctly? Check that all the cables required for projection are securely connected. sQuick Start Guide
Is the "contrastg" setting adjusted correctly? Adjust the "Contrast" setting from the configuration menu. s"Image"-"Contrast" p.43
Is the color adjusted correctly? Adjust the "Color Adjustment" setting from the configuration menu. s"Image"-"Color Adjustment" p.43
Are the color saturation and tint adjusted correctly? Adjust the "Color Saturation" and "Tint" settings from the configuration menu. s"Image"-"Color
Saturation", "Tint" p.43
Check Remedy
Are the image brightness and luminance adjusted correctly? Adjust the "Brightness" and "Brightness Control" settings from the configuration menu.
s"Image"-"Brightness" p.43 s"Settings"-"Brightness Control" p.45
Is the "contrastg" setting adjusted correctly? Adjust the "Contrast" setting from the configuration menu.
s"Image"-"Contrast" p.43
Is the lamp due for replacement? When the lamp is nearly ready for replacement, the images become darker and the color quality becomes
poorer. When this happens, replace the lamp with a new lamp. sp.83
Check Remedy
Are images from a port other than the Computer1 port being
projected?
The only images that can be displayed on an external monitor are computer images from Computer1 port.
sp.94
Only when projecting images from a video source