Part Names and Functions

 

9

 

 

 

Rear
•[Monitor Out] port sp.22

Outputs the projected computer's analogue RGB signals or RGB video signals to an external monitor from the source that is connected to the [Computer1/Component Video1] port. This feature is not available for video equipment signals.

•[Audio Out] port

This outputs the audio signals from the currently-selected input source to external speakers.

[Computer1/Component Video1] port•[Computer2/Component Video2] port sp.19, p.24, p.25

Input analogue RGB video signals from a computer and RGB video signals and component videog signals from other video sources.

•[Audio1] port sp.26

This is used to input audio signals from the equipment that is connected to the [Computer1/ Component Video1] port.

•[Audio2] port sp.26

This is used to input audio signals from the equipment that is connected to the [Computer2/ Component Video2] port.

•Speaker •Power inlet sp.31

Connects to the power cable.

•Rear adjustable foot•[Video] port sp.23

Inputs composite videog signals to the projector from other video sources.

•[Audio] port sp.26

This is used to input audio signals from the equipment that is connected to the [Video] port.

•[S-Video] port sp.24

Inputs S-Videogsignals to the projector from other video sources.

•[Audio] port sp.26

This is used to input audio signals from the equipment that is connected to the [S-Video] port.

• [USB] port sp.20, p.97

Connects the projector to a computer via the USBg cable when using the wireless mouse function.

Computer images cannot be projected by the projector by using the USB cable to connect the computer.

• Remote control light-receivingarea sp.13

Receives signals from the remote control.

• Rear adjustable foot • Security lock () sp.95 • Air intake vent sp.84

Clean the air intake vent periodically.

• [Control (RS-232C)] port sp.97

Connects the projector to a computer using an RS- 232C cable. This port is for control use and should not normally be used.