Safety Instructions
■ ■ ■ ■ ■
■
xiii
11.Do not block the slots and openings in the projector case.
They provide ventilation and prevent the projector from
overheating. Do not place the projector on a sofa, rug or
other soft surface or in a built-in installation unless proper
ventilation is provided.
12.Never push objects of any kind through cabinet slots.
Never allow liquid of any kind to spill into the projector.
13.Except as specifically instructed in this Owner’s Manual,
do not attempt to service this product yourself. Opening
or removing covers may expose you to dangerous voltages
and other hazards. Refer all servicing to qualified service
personnel.
14.Unplug the projector during thunder storms or if it is not
going to be used for an extended period. Do not place the
projector or remote control on top of heat-emitting
equipment or heated objects such as a car, etc.
15.Do not place the projector and remote control on top of
heat-producing equipment or in a heated place, such as a
car.
16.In the following situations unplug the projector from the
wall outlet and refer servicing to qualified service
personnel:
• If the power cable or plug becomes damaged or frayed.
• If liquid has been spilled into it or it has been exposed
to rain or water.
• If it does not operate normally when the operating
instructions are followed or if it exhibits a clear change
in performance indicating the need for servicing.
• If it has been dropped or the cabinet has been damaged.