Installation
■ ■ ■ ■
16
Connecting to a Macintosh desktop
computer
Before beginning, make sure that the projector and computer
are both turned off.
1. Connect the computer cables.
♦
Note:
Macintosh computer configurations vary. See your
computer manual for the location of the ports needed to connect
your EMP-7300/7200/5300 projector.
a. Connect either end of the computer cable to the
projector’s Computer 1 port. The Computer 2 port is
used when connecting a second computer.
b. Set the DIP switches of the Mac desktop adapter in
accordance with the resolutions you want to use (i.e.
16” mode).
c. Connect either end of the computer cable to the small
terminal of the desktop adapter.
d. Disconnect the monitor cable from the computer and
connect it to the large terminal (D-sub 15 pin) of the
desktop adapter.
Monitor cable
Computer cable
MAC
desktop
adapter
MAC monitor
adapter
Video
cable
adapter