Epson EMP-7300 - page 48

Installation
■ ■ ■ ■
28
Connecting to a Workstation
(only available for the EMP-7300/7200)
You can not use any kind of workstations. Before connecting,
make sure the type of your workstation. If you are not sure of
the type of workstation, consult your dealer or local
workstation company.
The following workstations are available:
• If your workstation output is 13W3, use a
13W3(male)↔HD D-Sub15(male) cable.
(Epson recommended, MS8158CA (1.8m) 6ft,
MS8128CA (0.9m) 3ft)
• If your workstation output is 5BNC, use a
5BNC(male)↔HD D-Sub15(male) cable
(Epson recommended, MS8102CA (1.8m) 6ft)
* You need to turn the Computer2/5BNC switch on the back of the projector to
5BNC.
♦ Note: If your computer contains the workstation function, refer
the section of "Connecting to a Computer" to connect.