Connecting to a Computer
■ ■ ■ ■ ■
■
15
♦
Note:
If your laptop uses a serial mouse, perform steps 2 and 3
using the PC serial mouse cable instead of the PS/2 mouse cable
or USB mouse cable (not shown in the illustration).
4. To use the ELP Link IV software or to use the Effects
buttons on the remote control, connect one end of the
serial cable to the SERIAL terminal on the square end of
the main cable.
5. Connect the other end of the serial cable to the serial port
on the back of your computer.
♦
Note:
You will not be able to use ELP Link IV software if your
laptop has only one serial port that is being used to support a
serial mouse.
6. Configure your laptop to work with an external mouse.
♦
Note:
You may have to set the display to appear on both the
laptop’s screen and the projector. Some laptops let you change this
setting with the keyboard’s function keys or by using a setup
utility provided by the computer manufacturer. Check your
laptop’s manual or online help for instructions.