Epson EMP-7700 In the case of DVI-D*

Connecting the projector to a computer - 31
In the case of DVI-D*
Digital signals are output to the projector without amendment if a digital video card for liquid
crystal displays and output port are mounted onto the computer.
·Connect the Computer’s digital output port to the projector’s Computer #1 DVI-D port with
the optional digital video cable (ELPKC20/21).
·Set the switch to the digital setting (right-hand side) with the tip of a ballpoint pen or other
pointed object.
Point:
·There are cases where the computer must be set up in order to switch the computer out-
put to the DVI-D. Refer to the instruction manual for the computer for further details.
·If you are simultaneously connecting a computer using a mini D-Sub 15pin connector,
connect it to the 5BNC connector.
Computer #1 DVI-D PortMonitor port
Digital Video Cable
(optional)