76 - When the Indicators Provide No Help

■
■■
■When the Indicators Provide No Help
Refer to each relevant item if the following situations arise but the indicators provide no help.
·The image is not projected page 76
·No sound page 81
·The image is unclear page 78
·The remote control will not work page 82
·The image is cut up (Large)/Small page 80
·Cannot end page 82
·The image color is bad page 80
·The image is dark page 81

The image is not projected

● Nothing is displayed

Nothing is displayed
●Is the Lens Cover still in place?
see page40
●Has the power been switched off and then on immediately?
The [Power] button will not operate after projection has been
finished (during the cooling down procedure). The [Power] button
will work again after the cooling down process Projection lamp
cooling operations: the operation indicator is illuminated in orange
has been completed.
see page48
●Is the Sleep Mode set at ON?
When the sleep mode has been set at [ON], the lamp will be
automatically extinguished if no operations occur and no signals are
input for a period of thirty minutes.
see page69
●Did you press the [Power] button?
see page41
●Has the brightness of the image been correctly adjusted?
see page66
●Is the system in the [A/V Mute] mode?
see page54
●Perform the reset procedure.
see page70
●Is the input image completely black?
There are cases where input images will become completely black
owing to screen savers, etc.
●Are image signals being input?
No message will be displayed if the [Menu] - [Settings] - [No Signal
Msg.] parameter is set at OFF. Set this to black or blue to display the
message.
Refer to the relevant items when the message is displayed.
see page77