1. Press the button.
2. To view the images in more detail, switch to the active window.
Tilt the button to select an image and then press the
button.
3. Project the images in the active window.
Press the button.
You may need to change the output destination using the
keyboard or by changing settings.
To change, hold down the key and press the key
(with a symbol such as or on it).
Once the setting is changed, projection will start after a short
period.
If images are still not projected after carrying out the above,
see p.12.
The image can be changed directly by selecting the desired
image source with the [Source] button.
Computer documentation
User's Guide "Selecting an Image Source While
Viewing Projected Images (Preview Function)"
If more than one device is connected to the projector, use the [Source] button to select the image source to be projected.
If using the or buttons to select the source, you can change the signal setting by
pressing the button repeatedly.
Select the images to be projected.
To select images to be
projected while viewing
all images being input.
(Preview Function)
If the source does not
change to the laptop PC
connected by a
computer cable.
If only one signal source is connected, images from that source will be projected automatically.
Active window
After startup, change the Control
Panel adjustments so that mirroring
is active
Examples of changing output
NEC
Panasonic
TOSHIBA
IBM
SONY
FUJITSU
Macintosh
BNC Video
DVI
Computer (Analog-RGB)
Computer
S-Video EasyMP