6
EMP-S1 User’s GuideBefore Using the Projector > Part Names and Functions
Rear•Computer/Component Video
ports P.13, P.18
Inputs analogue video signals from
a computer and Component Videog
signals from other video sources.
•Monitor Out port s P.1 4
Outputs the projected analogue
computer signal to an external
monitor. This feature is not available
for video signals.
•remote control infrared
receiver s P.9
Receives signals from the remote
control.
•power inlet s P.2 0
Connects the power cable.
•Video port s P.1 8
Inputs Composite Videog signals to
the projector.
Connect using an A/V cable.
•S-Video port s P.1 8
Inputs S-Videog signals to the
projector.
Connect using an S-Video cable.
•security lock s P.6 3
•Audio port s P.1 4, P.19
Inputs audio signals to the projector.
Connect using an A/V cable, or a stereo
RCA cable.
When using computer and video
equipment alternately, swap the cable or
use an audio switch.
•Control (RS-232C) port s P.6 5
Connects the projector to a computer using
an RS-232C cable. This port is for control
use and should not be used by the customer.
•remote control holder s P.9
Store the remote control in here
when not in use.