Advanced Colour Adjustments
If you would like to create your own images with settings adjusted the way you want them, you can adjust "Abs. Color Temp.", "Skin Tone" and/or "Advanced" in the "Image" menu.
The adjustment values can be stored in the memory so that you can retrieve them and apply them to the
projected images at any time. ( |
"Skin Tone", "Abs.Color Temp." and "Gamma" are adjusted in a single operation using the respective remote control buttons.
Skin tone adjustment
Skin tone adjustment
Absolute colour temperature
adjustment Absolute colour
temperature adjustment Gamma adjustment
Gamma adjustment
Differences between equipment may result in a slight variation in the colouring when images are projected, and you may want to adjust this. (Projection will stop temporarily during such adjustment.) There are two methods of doing so. One is to select one of the gamma correction values [2.0], [2.1], [2.2], [2.3], [2.4]. The other is customized adjustment, which is done with reference to the projected image or a gamma graph. The gamma graph's horizontal axis represents the input signal level and its vertical axis the output signal level.
Adjusting from the gamma correction values
From among the gamma correction values [2.0], [2.1], [2.2], [2.3], [2.4], select one that suits the connected equipment, or one of your own liking,
using 
or 
, and press 
or 
to confirm the selection.
Observe the gamma graph to check the result of the adjustment.
Lower values will increase the contrast 
of the dark portions but will tend to blur the bright portions. This is indicated by bulging in the upper portion in the gamma graph.
Higher values will darken the bright portions. This is indicated by bulging in the lower portion in the gamma graph.
20