14 - Parts, Names and Operations
Inserting the Remote Control Batteries
The remote control batteries are inserted in accordance with the following procedure:
1Remove the battery cover.
Apply pressure to the clip holding the battery cover, and then lift it upwards.
2Insert the batteries.
Ensure that the batteries are aligned correctly with the “+” and “-“ labels on the remote
control.
3Replace the cover.
Apply pressure to the battery cover until it clicks firmly into place.
Point
·Specified batteries: Two alkaline dry cells LR6 (AA).
·The batteries should be replaced approximately once every three months when used for
thirty minutes per day.
Caution
Ensure that unused batteries of the same type are used.