36 - Ending
3Check to confirm that the operation indicator is illuminated in orange, and then unplug
the power plug from the socket.
4Set the R/C ON OFF switch to [OFF] when using the remote control.
Point
The batteries are being consumed when the [R/C ON OFF] switch on the remote control is
set at [ON]. Ensure that the [R/C ON OFF] switch on the remote control is set to [OFF]
when not in use.
5Restore the front foot if it has been extended.
Steady the projector by hand, and then lift the foot adjust lever with a finger and gently
lower it into the main unit.
6Attach the lens cover.
Caution
Do not remove the power plug from the socket when the operation indicator is blinking in
orange. Failure to observe this may result in damage to the equipment and will speed up the
period for replacing the lamp.
Illuminated in orange
Operation indicator
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2
4
Enter
Foot adjust lever