86 - Replacing the Lamp
5Attach the fan.
Align the direction, insert the fan, and then secure it in place with the two screws.
Point
·Ensure that the lamp has been firmly secured in place. For safety reasons, this projector
has been designed so that the power supply is automatically disconnected when the fan
is removed. It will not be possible to switch on the power supply unless the lamp and fan
have been properly fitted.
·A replacement air filter is packaged with the replacement lamp. Replace the air filter at the
same time as replacing the lamp.
·Ensure that the lamp illumination time is reset in accordance with the following procedure
after the lamp has been replaced with a new one.
Resetting the Lamp Illumination Time
1 Press the [Help] button for five or more consecutive seconds.
The screen for resetting the lamp's illumination time will be displayed after the help menu
has been displayed.
2Select [Yes]
Press the [Tracking +, -] on the main unit (tilt the [Enter] button on the remote control) and
select [Yes].
3Execution
Press the [ (Enter)] button on the main unit or the [Enter] button on the remote control
to execute the process.
Power
Video
A/V mute
Resize
Esc
Help Menu
Shift
Keystone
Volume
S
y
n
c
.
S
y
n
c
.
T
r
a
c
k
i
n
g
T
r
a
c
k
i
n
g
Help Computer Help
Esc
Menu
Comp1
P in P Preset
Video
Comp2/BNC
Help
- Volume +
Auto Resize
Reset Lamp ON Time
Do you reset the Lamp ON Time?
Yes No
:Select :Execute