Epson Ext. Print Server Windows 98/95, Setting Up Your Device Using EpsonNet Internet Print

Setting Up Your Device Using EpsonNet Internet Print

EpsonNet Internet Print supports printing across the Internet using Internet Printing Protocol. Follow the steps below to set up the device.

Note:

Before following the steps below, you must make the appropriate IPP settings in EpsonNet Config. See the EpsonNet Config Reference Guide or “IPP” for instructions on setting up IPP. In the steps below, you will be asked for the IPP URL you set in the IPP setting screen in EpsonNet Config.

Windows 98/95

1.Make sure that TCP/IP is correctly installed and setup in the computer and a valid IP address is set for the computer and device.

2.Make sure that the IPP settings in EpsonNet Config are correct. See the EpsonNet Config Reference Guide or “IPP” for instructions on settings for IPP.

3.To start EpsonNet Internet Print, click Start, point to

Programs and then EpsonNet Internet Print, then click Add EpsonNet Internet Print Port.

193