Note:
❑Pressing the Reset button during scanning stops the
scanner and may cause an error in the scanning software.
❑The Reset button may not work if two computers are
connected to the scanner and the computer with the
bidirectional parallel interface is not turned on.
Scanner errors
If an error occurs, the scanner stops operating a nd the READY
and ERROR lights show the type of error. See page 4-2,
“Determining the Type of Error,” for details.
ERROR light READY light Error type
On On Command error
Flashing Off Interface error
Flashing Flashing Fatal error
Off Off Option error
R
Ginger Rev.C
A5 size Chapter 2
97/07/23 Pass 2, DR
Scanner Basics 2-3