If you’re done installing software, remove the EPSON GT-30000 Scanning Tools CD-ROM and restart your computer. Then follow the instructions in the next section to make sure your scanner is operating properly.

If you want to install the ISIS driver, PixTools QuickScan, or Presto! PageManager continue with the instructions under “Installing Additional Software” on page 49.

Testing Your Scanner Connection (Windows 98)

You need to verify that your scanner was properly connected and the software was installed correctly. Follow these steps to test scanner operation:

1.Open the Windows Control Panel and double-click the Scanners and Cameras icon to open the Scanners and Cameras Properties window.

2.Make sure EPSON GT-30000 is selected, then click the Properties button.

3.If necessary, click the General tab. Click the Test Scanner or Camera button. If the scanner is operating properly, Device Ready appears next to Status.

4.Click OK to close the Properties window.

Installing the Software 39