Note:

❏The print server does not have a default IP address. Be sure to assign a valid IP address manually or by using the DHCP server.

❏If the Dynamic DNS function is not supported, we recommend that you select Manual and enter an IP address. This is because if you select Automatic, the IP address of the print server changes every time you turn on the printer so that you need to change the printer port setting accordingly.

❏To use the DHCP server, make sure it is installed on your computer and configured correctly. See your operating system’s online help for detailed instructions.

12.Check the settings and then click Send.

If you have set a password for the print server, the Password dialog box appears. Enter your password (up to 20 characters) and then click OK. Follow the on-screen instructions.

c Caution:

It takes two or three minutes to send new settings to the print server. Do not turn off your printer until an on-screen message prompts you to do so.

80EpsonNet WinAssist Configuration Utility