3. Move the paper release lever to the single-sheet position.
4. Hold the cut-sheet feeder by placing your hands on both sides
of it. While holding down the buttons on both sides, fit the
notches on each side of the feeder over the mounting posts on
the printer. Lower the cut-sheet feeder until it rests on the
printer.
5. Remove the paper guide from the front of the printer. Then
slide the sheet guide for the cut-sheet feeder all the w ay onto
the mounting pegs.
6. Slide both the right and left edge guides as far to the sides as
possible.
A55new
LAdonis Rev.E
A5 size Chapter 5
97/04/07 pass 0
5-4 Using Printer Options