You are now ready to load paper with your cut-sheet feeder as described in the next section. To remove the cut-sheet feeder, turn off the printer and reverse the steps above.

Note:

Even if you are not using the cut-sheet feeder, you can use its paper guide instead of the standard paper guide. See “Loading paper manually from the paper guide” on page A-14for more information.

Loading paper from the cut-sheet feeder

This section describes how to load paper in the high-capacity and second-bin cut-sheet feeders.

Note:

❏Load single-sheet multipart forms, envelopes, and postcards only in the high-capacity cut-sheet feeder (bin 1 of the double-bin cut-sheet feeder).

❏For single-sheet multipart forms, use only the type that are glued at the top of the forms.

❏To avoid paper jams, do not allow the printer to stack more than 40 printed sheets on the paper guide at one time.

cCaution:

Do not use labels in the cut-sheet feeder.

A-6Enhancing Your Printer With Options