Epson LQ-680, LQ-680Pro After you set the loading position, press the, ❏Pressing the LF/FF [D] button moves the loading position

Note:

❏Pressing the LF/FF [D] button moves the loading position

toward the top of the page when loading a sheet from the front (from the paper guide). Pressing the LF/FF [D] button moves the loading position toward the bottom of the page when loading a sheet from the rear (from the cut-sheet feeders or the tractor).

❏The printer has a minimum and a maximum loading position. If you try to adjust the loading position beyond these limits, the printer beeps and stops moving the paper.

❏When the paper reaches the factory-set loading position, the printer beeps and paper feeding pauses briefly. Use the factory setting as a reference point when adjusting the loading position.

❏If you want to eliminate the top margin and print at the very top of the page, adjust the loading position so that the top of the paper lines up with the raised line on the ribbon mask, as shown below.

raised line

5.After you set the loading position, press the Pause button to turn off micro-adjust mode.

For both single-sheet and continuous paper, your loading position setting remains in effect until you change it, even if you turn off the printer.

2-30Paper Handling