Short Tear Off
3.If you need to adjust the position of the perforation to meet the
tear-off edge, use micro adjustment. First, see that the printer is on line and the MULTI-PARTindicator light is flashing. Then, adjust the position in 1/180 of an inch increments by pressing the FORM FEED button to feed the paper forward or the LINE FEED button to feed it backward.
Use micro adjustment to adjust the tear-off position immediately after the operation of the short tear-off function. After micro adjustment, the new tear-off position is reset and remains valid even after the printer is turned off, reset, or initialized. Never use the short tear off feature with labels.
4.When you resume printing after tearing off the sheet, the paper automatically feeds backward to the loading position before printing begins.
You can leave the short tear-off feature turned on (DIP switch 2-7 on) even when you are using single sheets. When you move the paper release lever to the single sheet position, short tear-off is disabled.